Slot 8 Aluminum Extrusion Insert Nuts, Slot 8 Two Serrated Drop‑in T‑nut, Drop-in Nut for 8 series Profile, 3030 Aluminum extrusion T-nut, Hammer Head Nuts China Factory Manufacturer
The 2301.008 series is a drop-in hammer head screw for 8 mm T-slot aluminum profiles. You pass the 7.7 mm head through the slot opening at the point where you need it, turn it a quarter turn, and the 16 mm head bears on the inside of the slot lips. No end-feeding, no frame disassembly, no separate nut buried in the groove. We supply the series in four thread lengths from M8×20 to M8×40 and two H configurations, in carbon steel with a zinc-plated finish, so one fastener family covers panel brackets, gusset joints and standoff mounts on the same machine frame.
Drop-in anywhere. The hammer head passes the slot opening, so you install it at the working position, no end-feeding, no frame disassembly.
Zinc-plated carbon steel. A sacrificial barrier for indoor framing, machine guards and workshop fixtures.
Repositionable. Loosen, turn the head back a quarter turn, slide, retighten, machine settings can change without new parts.
Quoted to your stack. Send the clamping stack and we match thread length and H value before production.
Slot 8 Hammer Head Screw Drawing
A T-bolt for aluminum extrusion turns an open T-slot into a reusable fixing point. The MINDE T-bolt series does it with a hammer-shaped head that drops through the slot opening, rotates behind the lips and clamps the part you are assembling from the outside. One head geometry, one thread standard, built for frames that get modified rather than built once and sealed.
Send us the profile drawing, the clamping stack thickness and the annual quantity, and we return a matched part number with a price. Ningbo Minde Technology Co., Ltd. has supplied aluminum profile fasteners and connectors from Ningbo since 2004.
T bolts are another crucial element in T-slotted profile assembly. They have a T-shaped head that fits into the T-slots and a threaded shaft that accommodates nuts or other fasteners. T-bolts are inserted into the T-slots and then tightened with nuts to secure components in place. This method provides a robust and adjustable connection similar to T-nuts.
Advantages of T bolts include:
Secure Connection: T-bolts create a strong and reliable connection, ensuring that components remain firmly attached.
Easy Adjustment: T bolts allow for quick and simple adjustments to component positioning along the T-slots.
Wide Compatibility: T bolts can be used with various types of fasteners, offering versatility in assembly.
In conclusion, Profile T nuts and T bolts play integral roles in the assembly of structures using T-slotted aluminum profiles. Their modular and adjustable nature, along with the ease of assembly, make them indispensable components in industries that require flexible and efficient construction methods. These components contribute to the rapid development of robust and customizable systems while minimizing labor and costs.
Installation Steps
Step 1: Load the head. Present the narrow side of the head to the slot opening at the working position and push it through until the thread is clear of the profile face. Any point along an open slot will accept it.
Step 2: Rotate to lock. Turn the screw a quarter turn so the long side of the head sits behind both lips. A correctly seated head stops against the inner faces; one that keeps turning freely has not rotated, or the slot is wider than the head.
Step 3: Set the position. Slide the screw along the slot to the fixing point. Mark the position on masking tape if several identical fixings have to line up.
Step 4: Build the stack. Place the mating part over the thread, then washer and nut, or thread directly into a tapped component. Check that at least two full threads remain visible beyond the nut face.
Step 5: Torque. Tighten to the agreed figure. Where a bracket uses two or more bolts, bring them up in stages from the centre outwards so the bracket does not cock and preload one bolt.
Step 6: Prove the fixing. Try to slide the head by hand. It should not move. Then load the assembly once as it will be loaded in service and re-check the torque after the first cycle, or after 24 hours on a static frame.
Frequently Asked Questions
What is a hammer head screw used for?
It puts a reusable thread into an open T-slot. You drop the head in at the working position, rotate it behind the slot lips and clamp a bracket, panel or guard from the outside.
Can you cut thread length to my drawing?
Yes, on a production quantity. Send the drawing with the length and the H value and we quote a dedicated run rather than asking you to absorb a standard length.
Are these fasteners reusable?
Yes. The head is not deformed during installation, so a screw can be removed and refitted elsewhere in the same slot family. Replace any screw whose thread has been damaged by over-torque or cross-threading.
Send us your drawing and we will match the part. Profile drawing, clamping stack thickness and annual quantity are enough for Minde’s sales and Technology team to come back with a part number, a price and a lead time.